.jpg)
neoVI FIRE 2 英特佩斯最新产品，下一代汽车多总线通讯接口和数据记录仪
基于现有的CAN和LIN网络，下一代车辆网络将会扩展以太网（Ethernet）和CAN FD，neoVI FIRE 2提供1个以太网（Ethernet）通道、8个CAN/CAN FD通道和4个LIN通道，所有通道同时运行，带硬件时间戳；USB电器隔离，是一款全功能的总线通讯接口和数据记录仪，一经推出，在汽车行业获得一致的好评。
neoVI FIRE 2主要功能
● 8个CAN/CANFD通道；
● 4个LIN通道，LIN1.X，LIN2.X和J2602；
● 1个以太网（Ethernet），DoIP/XCP；
● 所有通道可同时工作，硬件时间戳；
● 所有协议的报文收发功能；
● USB电器隔离，不损害电脑。
离线记录仪，脚本运行和ECU仿真
除了作为一个通讯接口，neoVI FIRE 2还可以在离线模式下工作，其内嵌系统可以运行实时脚本，将记录的数据保存在microSD卡中，并模拟ECU和网关的功能。有了这些功能，可以进行ECU刷新工作，定制刷写脚本将microSD卡中的数据下载到ECU中。
neoVI DLL，J2534，Linux和RP1210支持
由于有些用户需要定制开发自己的上位机软件，neoVI FIRE2支持三种开放的API：neoVI DLL API，SAE J2534 API和TMC RP1210 A/B。该neoVI DLL API包括了所有流行的开发环境的例子，包括C＃，VB.NET，VB6，Delphi，C ++ Builder，Visual C ++，LabVIEW和LabWindows。而且提供Linux操作系统的示例和驱动程序，而且提供API函数，允许第三方调用neoVI FIRE2，将其作为一个硬件密钥来使用。
Vehicle Spy软件应用
我们的Vehicle Spy完全支持neoVI FIRE 2，通过Vehicle Spy软件进行总线数据监听和发送，所有网络可同时运行； 可在Vehicle Spy中对neoVI FIRE 2进行脚本配置和下载，使neoVI FIRE2成为一个独立运行的数据记录仪和仿真器；用户可以利用强大的接口优势，加载DBC、LDF等数据库，编写和调试Fuction Block脚本，并将脚本下载到设备中。
硬件在环实时仿真功能
neoVI FIRE 2包含实时脚本引擎，可离线运行Function Block脚本，工程师创建一个脚本程序下载到硬件中运行，允许微秒级的时间误差，可满足更精确的测量和控制。通过硬件加速的功能，Vehicle Spy也可配置neoVI FIRE 2为实时发送的设备，如周期报文，总线数据回放，或实时脚本。
数据记录仪功能
neoVI FIRE 2能够将采集到数据存储在内置的microSD卡中，存储卡经过严格的实时性、存储速度、和故障测试，采用安全的FAT32的存储系统，让您的数据更加可靠。neoVI FIRE 2在每一帧报文中添加硬件定时的时间戳，达到微妙级的精度，绝不丢失任何细节，让您的数据更加精确；在Vehicle Spy通过脚本配置触发、过滤和判断条件，让您的记录仪更加灵活和智能，neoVI FIRE 2拥有一个强大的电源管理系统，可通过Vehicle Spy灵活配置休眠和唤醒条件。
相对第一代neoVI FIRE的改进
在第一代neoVI FIRE的基础上，neoVI FIRE 2主要增加了新的车载网络CAN FD和Ethernet以太网支持，性能比第一代产品neoVI FIRE更加强大，主要改进功能包括：
● 更强壮的接插件；
● 更大的脚本空间；
● 支持通过USB口读取SD卡数据；
● 更宽的供电范围（4.5V-40V）；
● 脚本配置时只需USB供电；
● MISC I/O口电压范围（0-40V）
General Specifications
Fourth-generation neoVI architecture: over 10x the performance of earlier devices
Low power consumption
Power Supply: 4.5-40V operation
LED membrane keypad: 10 full-color LEDs indicate network status; 2 LEDs for legacy status; 2 user buttons
Temperature Range: -40°C to +85°C
On-board UPS power supply for safe shutdown of data logger
Vehicle connectors: 26-pin male HD D-Sub and 9-pin micro D-Sub
One-year limited warranty
Field-upgradeable flash firmware
General Purpose IO: 2 MISC IO (0-40V) – can be configured as Analog/PWMIO
General purpose I/O rate report interval: 10 Hz to 1 kHz, or based on digital change
Microsoft-certified USB drivers
USB Host for neoVI MIC GPS or powering RAD-Moon accessory
Isolated high speed (480 Mb/s) USB
Standalone mode Including scripting, receive messages, transmit messages, expressions, I/O and transport layers
J2534 and RP1210 A/B compatible for CAN/ISO15765, Keyword and ISO9141
microSD card slot support for up to 128 GB of storage (or the limit of newer SDHC cards). The removable card is formatted using FAT32 for PC compatibility
Battery backed real time clock (RTC).
Timing Specifications
64-bit timestamping to an accuracy of 10 microseconds on CAN and LIN networks with no overflow. Accuracy of 0.5 microseconds possible if using only one network
Simultaneous operation on all CAN/LIN networks
Transmit message double-buffering on all networks, allowing back-to-back message transmission
Network Specifications – CAN
8x CAN (FD) Channels (NON ISO CAN FD with free upgrade to dual ISO/NON ISO support in 2016)
6 Dedicated ISO11898 Dual Wire CAN FD Physical Layer (MCP2561FD)
2 CAN with CAN mode and 3 software-selctable PHY options
DW CAN mode: 2 dedicated ISO 11898 Dual Wire CAN FD physical layers (MCP2561FD)
LSFT CAN mode: 2 Low Speed Fault Tolerant CAN physical layers (TJA1055)
SW CAN mode: 2 Single Wire CAN physical layers GMW3089 / SAE J2411(MC33897)
CAN FD support on all dual wire channels
Up to 1 Mb/s software-selctable baud rate for arbitration phase (auto baud capable)
Up to 8 Mb/s software-selctable baud rate for data phase (auto baud capable)
Listen-only mode support
Single Wire High Speed Mode, Test Tool Resistor, and High Voltage Wakeup support
Two software programmable DW CAN termination circuits
Network Specifications – LIN
4x LIN (Local Interconnect), ISO9141, Keyword 2000, or K and L Line
Full support for LIN 1.X, 2.X and J2602
LIN J2602 / 2.X compatible physical layer
Software enabled 1K LIN Master Resistor per channel
LIN Bus Monitor Mode identifies errors: Sync Break Error State and Length, Sync Wave Error, Message ID parity, TFrameMax/Slave Not Responding, Checksum Error and Transmit Bit Errors
LIN Bus Master Mode operates at same time as LIN Bus Monitor
LIN Bus Slave simulation – with or without an LDF file
LIN Bus hardware schedule table with support for LIN diagnostics
UART-based state machine
Programmable timing parameters including Inter-Byte, TX Inter-Frame, RX Inter-Frame and Initialization Waveforms (0.5 ms Resolution)
Initialization waveforms including Fast Init, Five Baud, and Custom
Software-selctable baud rate
Logic analysis mode to discover low level LIN or K Line errors
Network Specifications – DoIP / XCP / Automotive Ethernet
10/100 Ethernet PHY with low power mode
Compatible with BroadR-Reach® with RAD-Moon Ethernet Converter Accessory
Software controlled DoIP activation line
* Specifications subject to change. Please contact Intrepid for the latest information.